Planetary gearing is a compact different to straightforward pinion-and-gear reducers and is utilized in all kinds of functions to offer excessive torque. We’re going to go over the setup of a planetary gear meeting in SOLIDWORKS that can permit us to reveal the movement of the three drive forms of this technique.
To arrange our planetary gear system, first we are going to insert all the crucial parts into a brand new meeting doc:
- 3 x planet gears (blue)
- 1 x solar gear (orange)
- 1 x ring gear (black)
- 1 x service
- 3 x service shafts
- 1 x solar shaft
In every of the gear half recordsdata, pitch circles have been created as building circle sketches. The Ring gear has an extra building circle drawn to information the trail of the Planet gears. This will probably be key to appropriate movement and will probably be referred to as the Planet Gear Path.
To begin assembling the gear system, we are going to mate the again face of every gear Coincident to the Entrance Airplane of the meeting (guarantee that not one of the elements are fastened in-place, in that case right-click the half and choose Float). To hurry up this course of, use the A number of Mate Mode button, and choose the Entrance aircraft because the widespread reference.
Subsequent, mate the middle of the pitch circles on the Ring Gear and Solar Gear to the Meeting origin, they need to each be capable to spin.
Subsequent, mate the middle of the pitch circles of the Planet Gears coincident to the Planet Gear Path sketch.
Now, mate the Service shafts to the facilities of every Planet Gear (Concentric) and flush with their entrance faces (Coincident).
Get the Service in place by including Concentric mates to every Service Shaft, and one Coincident mate to deliver it flush with the again of one of many shafts.
Lastly, mate the Solar Shaft into place with one other set of concentric and coincident mates (this half shouldn’t be really crucial to indicate the movement we’re after). We wish the Solar shaft to rotate with the Solar gear, so we will even mate Reference Planes along with the Coincident mate to hyperlink the rotation of the 2 elements.
Now we’re prepared for the Gear mates. Choose the Pitch circles drawn on every gear to outline the Gear mates. This may outline the gear ratios, although cylindrical faces on the gears may be used and ratios may be manually overwritten. Add Gear mates between the three Planet gears and the Ring gear and one gear mate between a single Planet gear and the Solar gear (that is all that’s wanted for the entire gear movement). Whereas making the Gear mates, you’ll want to check every and be certain that the spin instructions are appropriate. Use the Reverse checkbox within the Mates Property Supervisor to repair if crucial. Additionally, don’t worry about making the gear tooth mesh appropriately (we are going to repair this subsequent.)
To group the gear mates right into a folder: shift-select the Gear mates, right-click, and choose Add to New Folder. Drag it to the highest of the Mates folder for ease of entry.
Subsequent, we are going to make one other group of mates to assist place the gear tooth appropriately, this may be carried out by creating Parallel (or Angle) mates between reference planes on the gears and reference planes on the meeting. Relying on how the gears have been created, this could get the tooth to mesh appropriately, on this meeting the Prime planes are aligned with tooth and the Entrance planes aligned with gaps, so getting exact alignment is definitely attained with parallel mates. Utilizing mates for the alignment is preferable to dragging them into place as a result of they can be utilized sooner or later if realignment is critical. Don’t overlook so as to add an extra mate to align the Service. Group these mates right into a folder as nicely. As soon as aligned, suppress your entire folder.
Now it’s time to create configurations for the three modes of motion. For every configuration a element will probably be fastened in place, earlier than fixing any element you’ll want to unsuppress the alignment mates to make sure these parts are within the appropriate place after which suppress the alignment mates as soon as once more. Add a configuration referred to as “Ring Gear Mounted.” Proper-click the Ring Gear and choose Mounted, This Configuration solely.
To check movement, rotate the planetary gears by the Service for greatest outcomes.
For the second configuration, copy and paste the Default Configuration and rename it “Solar Gear Mounted.” Align the gears and repair the Solar Gear on this configuration solely.
Repeat the method, naming the third configuration “Service Mounted” and repair the service solely in that configuration.
If at any level after switching configurations the gear tooth don’t mesh appropriately, first suppress the gear mates after which unsuppress the alignment mates. After the gears are realigned, you’ll be able to as soon as once more suppress the alignment mates and unsuppress the gear mates. Keep in mind that the gear tooth do not need to mesh appropriately for the movement of the planetary gear system to be noticed, although it should have an effect on analysis instruments similar to interference detection.
Try our web site to be taught extra and uncover different SOLIDWORKS options or contact us at Hawk Ridge Methods right this moment. Thanks for studying!
Sponsored content material by Hawk Ridge Methods