How To: 3D Print Customized Wall Mounts

Across the workplace, Nerf blasters are beloved and carefully guarded. Impromptu skirmishes are a daily incidence and arms races are alive and nicely. You could have one of the best blaster that Nerf has, however give it a pair months and Nerf has one thing even greater and badder than earlier than. On this battlefield, I have to be on the able to strike again or strike first. With the assistance of some 3D modeling and 3D printing, I’ve mounted my blasters each above and hidden underneath my desk – it was very easy to design and assemble these mounts. Let’s put together for battle and develop some mounts on your arsenal. This course of will work with any merchandise that you just’d prefer to see displayed in your wall, or, , hidden discreetly underneath your desk. 

Step 1: Establish the Goal – What Do You Need To Mount

Basically, any “gun rack” or mount goes to be a primary hook large enough to suit any blaster, which works, however it’s boring. To take advantage of safe match mount, particularly if you happen to’re mounting a blaster with 4 D batteries in it above your PC like I did, you could make a customized becoming to carefully maintain the contours of the blaster. Certainly one of our Product Affiliate’s, Matt, has a Sledgefire Nerf that didn’t have a mount, so I’m going to design one for his blaster.

Step 2: Reconnaissance – Establish the Greatest Place for Your Mounts to Grip

You’ll want to work out the place can be one of the best place for the mounts to grip. Within the case of the Sledgefire, I do know that some individuals like to depart the inventory unattached (Matt), whereas others hold it normal with the inventory put in (different Matt). Figuring out that, I need the mounts to grip in the identical place on each so it’s a typical mount. For earlier mounts I’ve used a set of calipers to measure and carefully estimate how broad and the way lengthy the options of the blaster is. This works pretty nicely, however I’ll admit there are most likely higher methods to do it. You would most likely use a contour gauge, however I understand how to make use of my useful calipers, in order that’s what I’m going to point out you.

Step 3: Develop a Plan – Measure and Sketch Your Object

I figured one of the best place to hint for the mount is underneath the barrel and under the set off guard, so I took the mandatory measurements and transferred them onto some notepads round a really exaggerated sketch so I had an concept of what the ultimate form ought to sort of appear like.

Step 4: Start Modelling – Match the Mount to Your Object

Beneath the barrel, it has a posh cross-section, so I’ll mannequin the holder into that form, however the grip of the blaster has a easy cross-section. I may make it a holder that’s completely sq., however the place’s the enjoyable in that? I took some extra measurements throughout the varied edges of the blaster to get sufficient reference factors to form it in Solidworks.

Step 5: Check Match and Iterate Your Design

For the primary iteration, I made it with none clearance so it suits the blaster as carefully as it could actually. As an alternative of printing the complete holder and discovering out it doesn’t match, I solely printed sufficient to see the place I have to trim or increase contours. Every of those was sufficient to see that I may prolong the grip only a tiny bit to extra securely lock into it, and the entrance wanted to be a bit wider to suit across the barrel and a bit shorter so it could actually slide straight again and miss the fake bolts.

Step 6: Design for Ease of Meeting

After a pair extra iterations, taking materials away in some spots and including materials in others, I had a form that match fairly nicely to each elements of the blaster. For the “arm” that extends out of the wall, I’ve a standardized form that to date has match even the widest of blasters. To make it simpler to put in on the wall and never need to drill across the arm, the thickness of this entire half is particularly designed so the pegs have simply the correct amount of clearance the place they’ll match tightly into the wall half and never want any glue to maintain it in place. Our PRO Sequence Mild Blue PLA is remarkably near the identical blue that Nerf used for the Sledgefire, and the Ultimaker Orange PLA is the brightest orange that matches fairly carefully to the Nerf security orange coloration. The opposite set was requested in PRO Sequence Pearlescent PLA and PRO Sequence Black PLA.

That’s all there may be to it! Certainly one of these was mounted immediately into the facet of the desk for fast draw, and the opposite was mounted above the desk. You’ll be able to adapt this to make customized pegboard holders, TV stands, whiteboard marker holders, or the rest that should repair towards the contours of an object.

I hope that this text was informative and has impressed you to create your individual Nerf wall mounts with the assistance of 3D printing. The numerous mounts that I’ve designed are actually within the MatterHackers’ Design Retailer, and I might be updating if I create extra fashions for the remainder of the workplace.

Is there one thing you’d prefer to see Alec create utilizing 3D printing? Tell us within the feedback under, or ship an e-mail to help@matterhackers.com.