3D Printing Information Briefs, January 25, 2025: ESG & Sustainability, Layoffs, Furnishings, & Extra – 3DPrint.com

We’re beginning off with some occasion information in in the present day’s 3D Printing Information Briefs, as AMUG has introduced the keynote audio system for its 2025 convention, and Dyndrite begins its World Tour 2025 this week. Shifting on, Stratasys launched its third ESG and Sustainability Report, whereas additive development firm ICON laid off about 25% of its workers. Lastly, Aitiip3D invested in a shot blasting system from AM Options, and 4 designers exhibited an award-winning assortment of 3D printed wooden furnishings.

AMUG Publicizes 2025 Convention Keynote Audio system

AMUG’s 2025 keynote audio system: Joe Scarbo (L), president, CEO, and founding father of performance-vehicle-focused Scarbo Efficiency Corp., and Ryan Watkins, analysis engineer and technologist for NASA Jet Propulsion Laboratory (JPL).

The Additive Manufacturing Customers Group (AMUG) Convention is an annual occasion designed for each novice and skilled AM customers. This yr’s convention, March 30-April 3 in Chicago, will welcome two thrilling keynote audio system to share inspiring messages about decision-making and what’s attainable with additive manufacturing. The primary is Ryan Watkins, Analysis Engineer with NASA Jet Propulsion Lab (JPL), who will heart his April 1st speak round combining design with AM to create a brand new class of crushable buildings for high-speed influence attenuation functions, and the limitations overcome to complete the job. Watkins, who has a PhD in aerospace engineering, has labored on flight initiatives as a cognizant engineer and a structural analyst. In NASA JPL’s Supplies Growth & Additive Manufacturing group, he focuses on integrating superior supplies with computational design and growing the lab’s topology optimization capabilities. In 2024, JPL gained the 3D Printing Trade Award within the aerospace, area, and protection class for his work on 3D printed crushable lattices, and his UnitcellHub was named JPL’s Software program of the 12 months and made obtainable to the general public.

On April third, ‘gearhead’ and racer Joe Scarbo, the President of design and manufacturing firm Scarbo Efficiency Corp, will talk about how his firm created quite a few 3D printed components for its two most up-to-date efficiency autos. After incomes his B.S. in mechanical engineering, Scarbo started designing and machining racing elements in faculty for the Arciero Racing household. He then grew to become an in-house mechanical design engineer with the Volkswagen Motorsport off-road race program, and later labored with a few corporations that leveraged 3D printing. Going again to his ardour for motorsports, he based his firm as an engineering consultancy in 2008, first specializing in efficiency autos earlier than shifting to low-volume manufacturing of motorsport merchandise and full autos in 2013. Scarbo Efficiency consists of 4 companies that provide design and manufacturing for bespoke autos and after-market elements. The Scarbo Classic (SV) RSR, which raced within the Pikes Peak Worldwide Hill Cimb, and the SV Rover, which ran within the Baja 1000 earlier than transitioning into the primary street-legal Hypertruck, each function many 3D printed components.

Dyndrite Launching 2025 “You Management the Laser” World Tour

AM software program innovator Dyndrite has introduced its 2025 “You Management the Laser” World Tour, which is planning to go to a number of key cities within the U.S. over the yr, in addition to one cease every in Japan and Germany. The tour will give additive engineers and supplies/course of scientists an opportunity to get hands-on expertise with Dyndrite’s software program capabilities for metallic 3D printing. Throughout hands-on periods, members will hear about case research from OEMs, finish customers, materials suppliers, and worldwide requirements organizations, studying complete data of frequent LPBF workflows. By the top of every workshop, they are going to know how you can create low-angle prints with out helps, and how you can use Dyndrite software program to develop their very own IP. This content material shall be very useful for AM professionals who work in extremely regulated industries, akin to power, aerospace and protection, and area. Plus, LPBF customers who work with printers from Aconity3D, Additive Industries, EOS, Nikon SLM Options, Renishaw, and Xact Metallic will certainly need to attend.

“In-person, hands-on engagements are important for showcasing the transformative capabilities of Dyndrite’s software program instruments and their influence on advancing additive manufacturing right into a dependable, environment friendly, and repeatable course of. By working straight with clients within the area, we handle real-world challenges via centered, interactive schooling that highlights our revolutionary method to AM software program,” stated Shawn Hopwood, Chief Advertising and marketing Officer and Head of Developer Relations at Dyndrite. “These workshops will educate LPBF professionals on how you can unlock groundbreaking half printing capabilities, increase workflow and machine productiveness, and obtain repeatable, high-quality 3D metallic printing outcomes.”

The primary cease on the tour is that this Tuesday, January twenty eighth, in Tokyo, Japan. The tour will even cease in Tampa, FL; Chicago, IL; Colorado Springs, CO; Lengthy Seaside, CA; Pflugerville, TX; Orlando, FL; Pittsburgh, PA; Detroit, MI; Las Vegas, NV; and at last Frankfurt, Germany.

Stratasys Launched Third ESG & Sustainability Report

Stratasys not too long ago revealed its third Conscious Manufacturing ESG (Atmosphere, Social, and Governance) and Sustainability Report, solidifying its place as a most well-liked provider for sustainable AM options. The report, ready in accordance with the International Reporting Initiative (GRI) and referencing SASB (Sustainability Accounting Requirements Board) requirements, highlights the corporate’s dedication to ESG excellence and enterprise danger administration, and showcases its achievements in environmental, social, and governance initiatives. As an example, Stratasys has launched carbon discount initiatives, carried out sturdy ESG infrastructures, established an Equal Father or mother Coverage, stories an 11.7% discount in water depth and 15.5% discount in GHG emissions depth, launched a Strategic Industrial Buyer Advisory Board, unveiled merchandise that underscore its dedication to Conscious Manufacturing (just like the SAF ReLife answer for repurposing waste PA12 powder), and appointed firm Co-Founder, Director, Board of Administrators member, and inventor of FDM expertise S. Scott Crump as its ESG & Local weather Champion.

“Stratasys is uniquely positioned to ship impactful decarbonization options at a important time. As clients face the necessity to cut back dependency on world provide chains, embrace localized and agile manufacturing, and handle local weather challenges, 3D printing-through our Conscious Manufacturing™ strategy-emerges as a sport changer. Our deep collaboration with staff, mixed with shut partnerships with key trade clients and our Buyer Advisory Board, permits us to drive sustainable innovation and empower companies to fulfill their environmental targets,” stated Rosa Coblens, Vice President, Sustainability, Stratasys.

Additive Building Firm ICON Cuts 25% of Employees

ICON Phoenix System

Texas-based ICON Applied sciences Inc., which builds 3D printed properties, has laid off 114 individuals, or about 25% of its workers. This was in keeping with a WARN letter filed with the Texas Workforce Fee, and a spokesperson for ICON later confirmed the information, noting that the corporate had “not too long ago made a tough determination” to re-align its workers “to concentrate on our highest priorities and proceed to put money into our greatest progress alternatives.” Based in 2017, ICON was formally launched in 2018 throughout SWSW with the primary permitted 3D printed home within the U.S. Since then, the corporate has raised over $450 million from its buyers, and was final valued at round $2 billion. It launched a suite of latest development 3D printing merchandise at SXSW 2024, and is alleged to have delivered over two dozen 3D printed properties and buildings throughout Mexico and the U.S. However, at this identical time final yr, the corporate additionally laid off 20% of its workers. This yr’s layoffs are reported to happen on March eighth, and the ICON spokesperson stated the corporate’s present precedence is to drive improvement of its Phoenix line of multi-story 3D printers.

The spokesperson continued, noting “Whereas our mission stays to develop these clever machines to construct humanity’s future, we are going to proceed to design and construct a number of key initiatives throughout residential, hospitality, social/inexpensive and people inside the Division of Protection with a extra streamlined group.”

Let’s hope ICON doesn’t go the best way of fellow AC firm Mighty Buildings.

Aitiip Purchases AM Options S1 Publish-Processing System

Pablo Murillo, Chief Enterprise Growth Officer, Aitiip, and Xavier Pardo, Gross sales Engineer, AM Options / Rösler Spain.

Aitiip3D, a part of the bigger Spanish Aitiip Know-how Centre, maintains one of many largest additive manufacturing improvement labs in Europe. The 3D printing service not too long ago invested within the S1 from AM Options – 3D submit processing expertise to automate its post-processing operations, which helped obtain elevated manufacturing capability, increased operational effectivity, and higher general high quality. The corporate is thought for its custom-engineered options in lots of AM functions, from prototyping to particular person components, and with manufacturing volumes growing, bettering its post-processing abilities grew to become needed. The S1 shot blasting machine is a 2-in-1 system, cleansing and creating the ultimate floor end for one job with a single processing medium. Fixed rotation of the PBF 3D printed components throughout the 30-minute blast operation permits constant floor finishes and delicate processing. Plus, the S1 may be operated in each guide and automated modes, providing quite a lot of completely different blast media for no matter your components require.

“Earlier than we put in the S1, all submit processing operations needed to be carried out manually. This induced not solely exceptionally excessive labor prices but additionally restricted our operational flexibility. Due to the automated S1 system we have been capable of considerably improve our manufacturing capability,” stated Pablo Murillo, Chief Growth Officer at Aitiip.

“Now we will supply the components contained in numerous assemblies for merchandise already available on the market as 3D printed elements. With our guide submit processing operation this was unthinkable. Due to the superb and constant floor finishes created by the S1 our merchandise are actually in full compliance with the shopper specs with out requiring any further processing. General, the time required for submit processing and the related prices could possibly be drastically decreased. Your complete submit processing operation has grow to be quite a bit quicker, cleaner and extra environment friendly.”

3D Printed Wooden Furnishings Showcased in Add Wooden Exhibition

Add Wooden, an exhibition at Designblok in Prague, Czech Republic that explored the huge potential of biodegradable, recyclable 3D printed timber, featured 4 separate furnishings initiatives made by designers Esmée Willemsen, Janek Beau, Friedrich Gerlach and Julia Huhnholz. As a substitute of doing solo initiatives, they determined to work as a bunch, and approached Additive Tectonics a couple of collaboration utilizing its EconitWood. Leftover wooden from timber harvesting and sawmills is mixed with a pure, flame-retardant, and non-toxic magnesium carbonate binder to create the 3D printable materials. Willemsen created a coffin referred to as Finalform.stl, which may be made to order and reduces the environmental influence of burials by leaving out non-wooden parts, like metallic screws, present in regular coffins. Beau centered on effectivity along with his 3D printed stool, referred to as Sandbox, which may grow to be a modular, multifunctional furnishings answer when utilized in multiples—two modules create the peak of a chair, whereas three are the peak of a desk. The modules can be shipped with out packaging, as the size are optimized to adjust to most transport restrictions.

Gerlach additionally centered on effectivity along with his Lumo couch, that includes an EconitWood shell that’s stackable throughout printing to maximise area on the print mattress. This reveals that it’s really attainable to 3D print large-scale furnishings items with out difficulty, and the couch additionally contains a detachable material suspended seat, which attaches to a groove alongside the sting of the shell. The Lumo is biodegradable, as each the filling and the upholstery of the seat are 100% wooden. Lastly, Huhnholz created a shelving unit referred to as Offset, which was additionally designed for optimum effectivity. It’s manufactured from three clean, sculptural 3D printed posts, designed with a conical form to allow them to be nested throughout manufacturing, and extra may be made in much less time. The unit is assembled by stacking the posts and including laser-cut aluminum plates. The group’s “Add Wooden: Views on Printable Timber” gained the 2024 Designblok Award for Greatest Designer Presentation.