3D Printing Webinar and Occasion Roundup: Could 19, 2024 – 3DPrint.com

This week, Stratasys continues its superior coaching and begins its Expertise Stratasys tour throughout the US. ASTM’s AMCOE continues its skilled certificates course, and SPE is providing a workshop about selecting the best plastic materials. ADDITIV Design World takes place, and Makelab will maintain a celebration celebrating the opening of its new San Francisco location! Learn on for the small print of those occasions, and plenty of others.

3D Printing Information Unpeeled

Our Government Editor Joris Peels, who’s additionally the Vice President of Consulting at Additive Manufacturing Analysis (AMR), presents a information livestream one to 2 occasions every week known as 3D Printing Information Unpeeled at 9:30 am EST. For every episode, Peels will get on LinkedIn Dwell and tells us, in 20 minutes or much less, what he considers to be the highest information tales from the 3D printing trade that week, and why they’re necessary. Among the tales in his roundup are ones we’ve coated at 3DPrint.com, and a few usually are not, however they’re all equally attention-grabbing and impactful!

Could 20-25: SPE’s Good Materials Choice Workshop

In line with the Society of Plastics Engineers (SPE), 45% of plastic product failures are as a consequence of incorrect materials selections. To keep away from the identical destiny, join SPE’s 4-part “Fundamentals of Plastic Materials Choice” workshop this week! From 11 am to 1 pm EST on Could 20, 21, 22, and 24, this digital workshop will provide help to grasp the artwork of plastic materials choice so you may make your best option in your mission. You’ll additionally find out about options that might enhance the cost-effectiveness and efficiency of your merchandise, and develop an understanding of plastic materials habits from molten resin to end-use half efficiency. The presenter might be Eric Larson, Proprietor and Founding father of engineering consulting firm Artwork of Mass Manufacturing.

“Utilizing frequent language, we’ll translate basic phrases a couple of materials’s traits – resembling stiffness, power, and toughness – into particular technical properties which are related – and quantifiable – to the supposed software. We are going to evaluate trade normal exams which are used to quantify materials properties, and focus on the way to interpret the info and perceive the habits of the fabric to evaluate its use in an supposed software.”

You’ll be able to register for the workshop right here. Seats are restricted, so don’t delay!

Could 20: ASTM Skilled Certificates Course in AM

ASTM Worldwide’s AM Heart of Excellence (AMCOE) is holding its ninth Skilled Certificates Course in Additive Manufacturing. This complete providing, which ends on June 4th, consists of eight modules over a one-month interval that cowl all the AM course of chain, offering attendees with a superb mixture of stay knowledgeable Q&A periods and self-paced studying. Two modules might be coated every week, taught by consultants from academia, trade, nationwide labs, and regulatory our bodies. The modules coated in Week 3, which begins Could twentieth, are Mechanical Testing and AM Security; the stay Q&A session with instructors might be held Could twenty eighth.

“This course will equip attendees with core technical data associated to frequent AM practices and can permit them to earn a Skilled AM Certificates that may function the inspiration and pre-requisite for incomes future specialised role-based AM certificates via the ASTM AM CoE. Attendees will full a multiple-choice examination upon course completion.”

You’ll be able to register for the course right here.

Could 21 – 23: Stratasys Continues Superior Coaching

Stratasys continues superior coaching programs this week at its North American subsidiary headquarters in Minnesota. From Could 21-23, “Stereolithography Superior Operations” might be provided to clients searching for deeper data of the corporate’s complete SLA workflow on the Stratasys Neo 3D printer household.

“Learners might be launched to subjects resembling supplies consideration, working in Materialise Magics software program, printing operations, greatest practices and elements ending methods.”

For extra particulars and registration, e mail coaching.us@stratasys.com.

Could 21: TriMech on Enhancing Healthcare with AM

In case you’ve ever puzzled how AM is used within the medical discipline, then you definitely’ll wish to tune in to TriMech’s webinar on “Enhancing Healthcare with Additive Manufacturing” at 10 am EST on Tuesday, Could twenty first. Attendees will obtain a high-level overview of various Stratasys tools—together with SLA with the NEO platform, P3 with the Origin One platform, biocompatible supplies with FDM, SAF with PA11 and PA12 for surgical guides, and extra—and the way it’s used within the medical trade. Varied use instances might be highlighted for every expertise.

“Be a part of us as TriMech’s Caleb Overcash and Stratasys’s Maddy Duensing and Evan Hochstein will go over every expertise and their completely different use instances highlighted, together with their corresponding biocompatible supplies. Plus, discover out what our engineer’s favourite additive medical materials is!”

You’ll be able to register for the webinar right here.

Could 21: B9 Elite Micro 3D Printer

This Tuesday, Could twenty first, B9Creations is holding a webinar unveiling its latest 3D printer. To “Uncover the Subsequent-Gen B9 Elite Micro 3D Printer,” tune in at 11 am EST, and study all about its ultra-micro printing decision capabilities, excessive accuracy and repeatability, and extra. A number of members of the B9Creations group will current an in-depth exploration of the B9 Elite Micro workflow, together with its new micro-specific CAM software program capabilities. Attendees can even obtain an outline of the brand new high-performing Elite Micro Supplies, complete evaluation of the patented expertise powering the 3D ecosystem, how clients are at the moment utilizing the B9 Elite Micro, and extra. There can even be a stay Q&A session.

“Now able to printing all the way down to an astonishing 10 microns, this cutting-edge expertise delivers enhanced decision for self-supporting overhangs, thinner vertical wall thicknesses, and finer channel diameters – all with tolerances that surpass precision manufacturing.”

You’ll be able to register for the webinar right here.

Could 21: Past the Forge with HP

Additionally at 11 am EST on the twenty first, HP will maintain the second session in its “Past the Forge: A Metals 3D Printing Collection.” The primary one was about Steel Jet expertise, and this session will give attention to the “Advantages of 3D Printing vs Conventional Strategies.” The audio system might be Brett Harris, Sr. World Product Supervisor, HP Inc., and Zachary Lovato, HP 3D Print, Americas Advertising and marketing, HP Inc.

“On this subsequent session, hear from the HP Specialists on what advantages 3D printing has over conventional strategies and when it is smart to decide on one over the opposite.”

You’ll be able to register for the webinar right here.

Could 21: AM for Plane Cockpit Interiors

3D Techniques can also be holding a webinar on Tuesday the twenty first, all about “AM for Plane Cockpit Inside Elements,” at 3 pm EST. Sponsored by GIE Media’s Aerospace Manufacturing & Design, it can characteristic collaborators from 3D Techniques and the College of Dayton Analysis Institute (UDRI), who will introduce a brand new robust, flame-retardant photopolymer for AM. This materials was developed and examined in accordance with FAR 25.853 and extra necessities for cockpit parts. Attendees will study concerning the materials’s environmental/efficiency take a look at outcomes, and its mechanical properties, which allow qualification and use for aerospace functions.

“The aerospace group has a necessity for substitute elements for growing older plane, nonetheless unique manufacturing pathways now not exist or are costly with lengthy lead occasions. Additive Manufacturing (AM) now has the potential to handle present provide challenges for cockpit inside parts.”

You’ll be able to register for the webinar right here.

Could 21: Core Additive Injects New Life into Manufacturing

The final occasion on the twenty first will happen in Australia, as Core Additive and NDC Plastic Moulding supply “Injecting New Life into Manufacturing,” that includes Markforged, from 4-7 pm AEST. NDC Plastic Moulding is Core Additive’s new Additive Manufacturing Centre of Excellence in Queensland, and attendees will get pleasure from welcome drinks earlier than a collection of brief shows, resembling “How Additive Manufacturing is Remodeling the Meals & Beverage Business.” There can even be a Markforged 3D printer viewing and Q&A session.

“The demand for Australia 3D Printing market is anticipated to succeed in US$ 164 million by 2030, accelerating with an annual development charge of 8.7% (sourced by Yahoo finance).

“The demand for such providers within the trade has reached unprecedented heights, and by integrating Additive Manufacturing, NDC Plastic Moulding is worked up to supply native firms a complete suite of providers coupled with intensive experience, all underneath one roof.”

You’ll be able to register for the occasion right here.

Could 22: Massivit’s Maryland Open Home

In case you occur to be on the East Coast this week, be part of Massivit North America for its last Open Home occasion of the spring, at occasion administration firm Hatch Reveals in Elkridge, Maryland on Wednesday, Could twenty second. The group will showcase the industrial-grade Massivit 5000 for ultra-fast customized design and printing capabilities for props, shows, and signage, in addition to the Massivit 10000-G, designed for high-speed, direct printing of instruments, molds, mandrels, jigs and fixtures, and plugs for composite supplies manufacturing. Hatch Reveals, a Massivit buyer, can even clarify how the expertise has boosted its enterprise.

“Be a part of us for this inspiring occasion at Hatch Reveals the place you’ll have the chance to witness stay demos of our high-speed, big 3D printers in motion. Drinks and lunch are supplied!”

You’ll be able to register for the open home right here.

Could 22: Expertise Stratasys Tour Begins

The Expertise Stratasys Tour throughout the US is ramping up once more, and this week the truck stops in San Diego, California on the twenty second. This can be a handy option to see the corporate’s expertise for your self, as every cease is hosted by a neighborhood 3D printing group that may reply your questions and stroll you thru the assorted printers and functions—this cease might be hosted by Purple Platypus. There might be shows showcasing a wide-ranging number of supplies, in addition to loads of instance elements from many various industries and applied sciences.

“Be a part of us at certainly one of our tour stops throughout the US to see the most recent in Stratasys 3D printers, supplies, software program and additive options, together with Stratasys printers – the H350™, F370CR, J55™, Origin® One, Neo®800 and the brand new F3300™.”

You’ll be able to register for this tour cease right here.

Could 23: ADDITIV Design World

The primary-ever version of ADDITIV Design World by 3Dnatives will happen this Thursday, Could twenty third, from 9 am till 1 pm EST. This free worldwide, digital occasion is devoted to the most recent traits in design for additive manufacturing (DfAM) and can characteristic three workshops and three panel discussions. Plus, 3DPrint.com is a proud sponsor for this occasion; different sponsors and companions embody SPE, VoxelMatters, IAM3DHUB, and the Additive Producer Inexperienced Commerce Affiliation (AMGTA).

“The purpose? Half a day devoted to conferences, workshops, and networking that may carry collectively the principle gamers in additive manufacturing and software program. Come to study extra about half design and traits for the longer term!”

You’ll be able to register for the occasion right here.

Could 23: 3DHEALS on 3D Microfabrication 2.0

The newest digital panel dialogue by 3DHEALS might be about 3D Microfabrication 2.0, at 11 am EST on the twenty third. Moderated by neuroradiologist Dr. Jenny Chen, the founder and CEO of 3DHEALS, the dialogue by among the discipline’s high consultants and pioneers will showcase the thrilling potential of 3D microfabrication methods in revolutionizing medical gadget manufacturing, together with microneedles, microfluidic gadgets, and robotic and endoscopic ideas.

“From intricate implants to specialised devices, individuals will achieve unique insights into how micro or nano-scale 3D printing is reshaping the design, manufacturing, and performance of medical gadgets with unprecedented precision and effectivity at a micro-scale utilizing a wide range of biomaterials.”

You’ll be able to register for the occasion right here.

Could 25: Makelab’s San Francisco Launch Social gathering

Lastly, on Saturday evening, Could twenty fifth, 3D printing service bureau Makelab is having an epic launch social gathering for its new location in San Francisco! The Makelab San Francisco x Studio 55 Launch might be from 6:30-9:30 pm PDT on Grace Avenue in San Francisco, the place NYC-based Makelab will share area with Studio 55, a artistic haven of {hardware} innovation and Studio 45’s latest sister location. The ability supplies a daily workspace for each groups, and those that attend the social gathering can tour each, plus get pleasure from meals, drinks, and the attractive rooftop deck.

“From the underside of our hearts, thanks for the help and excellence you’ve all the time demanded from us, making us higher,” stated Christina Perla, Makelab’s Co-Founder and CEO. “Increasing Makelab from New York to San Francisco is a testomony to your belief and enthusiasm. We’re excited to carry our providers to the West Coast and proceed this journey collectively!”

You’ll be able to register for the social gathering right here.

Do you might have information to share about any future webinars or digital and stay occasions? Please tell us!