Exploring AAA and TACAS Configuration with Cisco Modeling Labs

I’ll admit to not having finished a radical verification. Nevertheless, I’d nonetheless wager cash that AAA/RBAC providers are extra ceaselessly talked about on Cisco certification blueprints than another networking matter. From the CCNA to the Knowledgeable degree, you’ll discover AAA, TACACS+, RADIUS, and RBAC listed on the examination subjects.

Here’s a handful of examples if you happen to’d prefer to test it out your self:

• 200-301 CCNA
  • 2.8 Describe AP and WLC administration entry connections (Telnet, SSH, HTTP, HTTPS, console, and TACACS+/RADIUS)
  • 5.8 Differentiate authentication, authorization, and accounting ideas
• 350-401 ENCOR
  • 5.1 Configure and confirm system entry management
• 300-410 ENARSI
  • 3.1 Troubleshoot system safety utilizing IOS AAA (TACACS+, RADIUS, native database)
• 300-430 ENWLSI
  • 8.1 Implement system entry controls (together with RADIUS and TACACS+)
• 350-701 SCOR
  • 2.7 Configure AAA for system and community entry corresponding to TACACS+ and RADIUS
• 300-715 SISE
  • 7.0 Community Entry Gadget Administration
• 350-601 DCCOR
  • 5.xa Apply community|compute|storage safety – AAA and RBAC
• 300-615 DCIT
  • 5.xb Troubleshooting community|compute|storage safety – AAA and RBAC
• 350-501 SPCOR
  • 1.6b Describe administration aircraft safety – AAA and TACACS
• 300-540 SPCNI
  • 4.1e Implement infrastructure safety – TACACS

OMG. That’s 10 completely different certifications from Affiliate to Skilled the place these subjects present up. You’ll additionally discover them on Knowledgeable-level exams, such because the Enterprise Infrastructure, Enterprise Wi-fi, Safety, Service Supplier, and Information Heart labs. (If anybody on the market can discover one other matter with as broad a protection, please let me know within the feedback. I’d like to know what I’ve neglected thus far.)

Go to the Cisco Studying Community to view the examination subjects for all Cisco certification exams. View examination subjects

Okay… it’s positively essential… however what is AAA?

AAA is a crucial matter, nevertheless it’s one which even long-time community engineers might not absolutely perceive. So earlier than we see it in motion, how a couple of fast overview of what the “triple A’s” imply?

Within the “AAA in Motion!” comedian, Carl experiences your complete AAA course of:

• The primary “A” stands for Authentication. We see this represented when Carl is prompted to confirm his identification earlier than he’s allowed to make a change to the community.
• The second “A” stands for Authorization. Even after the community verifies Carl’s identification, he has to examine whether or not he has the fitting(s) to make this variation, based mostly on which rights he has been granted on the community.
• And the third and ultimate “A” stands for Accounting, which Carl sees in motion when the community logs the change he makes to the community.

TACACS comes into the image to assist the centralized administration of customers, roles, and logs (authentication, authorization, and accounting). Whereas every community system could possibly be domestically configured to deal with AAA, this doesn’t scale properly for enterprises. A greater resolution is for every community system to speak with a central “server” for these actions. TACACS is a protocol that community gadgets and servers use to speak and deal with every of the “A’s.” A “TACACS Server” is a software program software that helps the TACACS protocol.

Can we get to the Exploration, already?!

Now that we perceive the vital position that AAA performs in a community (and that it’s a necessary matter throughout many certifications), I’d like to point out you easy methods to examine and put together for it utilizing my favourite community simulation/virtualization instrument: Cisco Modeling Labs (CML). As a result of I’m all about sharing my exploration actions, I posted a few CML topology information on GitHub within the CML-community repository below Cisco DevNet.

You’ll see that one CML topology contains simply an IOL router, whereas one other provides a Nexus 9000v change to cowl knowledge heart platforms as properly. So, after you’ve learn this weblog publish, positively obtain the topologies and discover them your self.

Easy methods to run a TACACS Server in Cisco Modeling Labs

Earlier than you’ll be able to configure TACACS on a change or router, you have to have a TACACS server out there within the community. A standard TACACS server for a manufacturing community is Cisco ISE, a full “identification providers engine” for system administration, community entry, wi-fi safety, VPN entry, and extra.

Cisco ISE is a crucial product and matter for community engineers. In truth, we now have a certification examination devoted to it. And whilst you can add Cisco ISE to a CML node library utilizing the node definition out there on the CML-Group, operating a full ISE server within the topology can really feel overkill when the main target is simply on configuring TACACS for system administration.

Fortunately, there are light-weight options. My go-to choice is the open-source “tac_plus” software that has been out there for a few years. Tac_plus is a primary Linux software that may be downloaded and put in on most Linux distributions. Whereas energetic growth of the undertaking appears to have stalled, it really works nice and continues to be a wonderful choice for circumstances corresponding to this.

When you take a look at the picture of the CML topology, you’ll see “aaa-server” on the left-hand facet of the diagram. It is a commonplace Ubuntu node from the CML reference platforms, with a beginning configuration setup to put in tac_plus and configure it as a primary TACACS server. Be at liberty to go and take a look at the configuration within the topology file for full particulars, however listed here are the fundamentals of what I did to construct my TACACS server:

1. Set up the necessities to obtain and set up the tac_plus software from supply code.
2. Create the “tac_plus.conf” configuration file to specify the TACACS secret key, customers, and roles/privilege ranges for each IOS and NX-OS platforms.
3. Create a “tac_plus.service” file to setup tac_plus as a service.
4. Obtain, extract, set up, and begin the tac_plus server.

With the set up and configuration of the aaa-server a part of the bottom CML topology file, tac_plus will probably be operating and able to take requests as quickly because the lab is began.

cisco@aaa-server:~$ systemctl standing tac_plus
● tac_plus.service - tac_plus Service
     Loaded: loaded (/and many others/systemd/system/tac_plus.service; enabled; vendor pres>
     Lively: energetic (operating) since Mon 2024-10-14 19:16:37 UTC; 2s in the past
   Fundamental PID: 5982 (tac_plus)
      Duties: 1 (restrict: 2310)
     Reminiscence: 416.0K
        CPU: 2ms
     CGroup: /system.slice/tac_plus.service
             └─5982 /tacacs/sbin/tac_plus -G -C /and many others/tacacs/tac_plus.conf -d 8 >

Oct 14 19:16:37 aaa-server systemd[1]: Began tac_plus Service.
Oct 14 19:16:37 aaa-server tac_plus[5982]: Studying config
Oct 14 19:16:37 aaa-server tac_plus[5982]: Model F4.0.4.28 Initialized 1
Oct 14 19:16:37 aaa-server tac_plus[5982]: tac_plus server F4.0.4.28 beginning
Oct 14 19:16:37 aaa-server tac_plus[5982]: socket FD 4 AF 2
Oct 14 19:16:37 aaa-server tac_plus[5982]: socket FD 5 AF 10
Oct 14 19:16:37 aaa-server tac_plus[5982]: uid=0 euid=0 gid=0 egid=0 s=11063704>

Easy methods to allow AAA and TACACS on a Cisco IOS Router

With our TACACS server up and operational, we will now configure our IOS router to make use of it. Earlier than configuring the TACACS server on IOS, we have to guarantee some primary “pre-work” is completed on our router. IOS has been round for years and has skilled many modifications in how authentication and authorization are dealt with.

So, the very first thing we need to do is make sure the “new mannequin” of AAA is enabled on our system:

aaa new-model

Subsequent, we need to create a neighborhood consumer account that may entry and administer the system if the TACACS server turns into unreachable. You may also need to use a neighborhood account for serial/console connections.

username cisco privilege 15 secret cisco

On this command, the username and password are each set to “cisco.” (Not probably the most safe selection, however that is only a lab.) The “privilege 15” a part of the command signifies that this consumer will probably be assigned an “administrator” position. Privilege 15 is the very best degree on an IOS system and permits the consumer to execute any and all instructions.

We’re able to configure and take a look at TACACS now. However first, I leap onto the console for the server and begin monitoring the logs. This fashion, I can examine and confirm outcomes on the server facet in addition to on the shopper.

# On aaa-server
journalctl -fu tac_plus

# Output
Oct 14 19:16:37 aaa-server systemd[1]: Began tac_plus Service.
Oct 14 19:16:37 aaa-server tac_plus[5982]: Studying config
Oct 14 19:16:37 aaa-server tac_plus[5982]: Model F4.0.4.28 Initialized 1
Oct 14 19:16:37 aaa-server tac_plus[5982]: tac_plus server F4.0.4.28 beginning
Oct 14 19:16:37 aaa-server tac_plus[5982]: socket FD 4 AF 2
Oct 14 19:16:37 aaa-server tac_plus[5982]: socket FD 5 AF 10
Oct 14 19:16:37 aaa-server tac_plus[5982]: uid=0 euid=0 gid=0 egid=0 s=1106370448

Within the above command, the “-f” argument “follows” the log messages as they arrive in.  And the “-u tac_plus” choice limits the output to solely message from the tac_plus service.

Glorious. Now, again to the router to configure the tacacs server and add it to a gaggle of servers that the router can use for AAA service.

tacacs server aaa-server
 tackle ipv4 192.168.0.10
 key tacacs123

aaa group server tacacs+ AAA-TACACS
 server identify aaa-server

I’m at all times a fan of testing that one thing will (or possible will) work earlier than continuing. Conveniently, IOS helps a “take a look at aaa” command that we will use.

take a look at aaa group AAA-TACACS iosadmin admin123 legacy

# Output 
Making an attempt authentication take a look at to server-group AAA-TACACS utilizing tacacs+
Consumer was efficiently authenticated.

That appears nice! And I can see the logs on “aaa-server” as properly.

Oct 14 19:55:16 aaa-server tac_plus[6473]: join from 192.168.0.1 [192.168.0.1]
Oct 14 19:55:17 aaa-server tac_plus[6473]: login question for 'iosadmin' port unknown-port from 192.168.0.1 accepted

With a robust sense of confidence, let’s full the AAA configuration for all three “A’s.”

! Authentication 
aaa authentication login default group AAA-TACACS native

! Authorization 
aaa authorization exec default group AAA-TACACS native 
aaa authorization console

! Accounting
aaa accounting exec default start-stop group AAA-TACACS
aaa accounting instructions 1 default start-stop group AAA-TACACS
aaa accounting instructions 15 default start-stop group AAA-TACACS

Sustaining that robust sense of confidence, let’s see if it really works. Finish/exit on the router till it’s essential log again in.

ios01 con0 is now out there

Press RETURN to get began.

Consumer Entry Verification

Username: 

Attempt to log into the router utilizing the TACACS credentials for the IOS system.

Consumer Entry Verification

Username: iosadmin
Password: 

ios01#

Success! Verify the logs on the server, and it is best to see one thing like this:

Oct 14 20:05:03 aaa-server tac_plus[6492]: login question for 'iosadmin' port tty0 from 192.168.0.1 accepted
Oct 14 20:05:03 aaa-server tac_plus[6493]: join from 192.168.0.1 [192.168.0.1]
Oct 14 20:05:03 aaa-server tac_plus[6493]: Begin authorization request
Oct 14 20:05:03 aaa-server tac_plus[6493]: do_author: consumer="iosadmin"
Oct 14 20:05:03 aaa-server tac_plus[6493]: consumer 'iosadmin' discovered
Oct 14 20:05:03 aaa-server tac_plus[6493]: exec authorization request for iosadmin
Oct 14 20:05:03 aaa-server tac_plus[6493]: exec is explicitly permitted by line 6
Oct 14 20:05:03 aaa-server tac_plus[6493]: nas:service=shell (handed through)
Oct 14 20:05:03 aaa-server tac_plus[6493]: nas:cmd* (handed through)
Oct 14 20:05:03 aaa-server tac_plus[6493]: nas:absent, server:priv-lvl=15 -> add priv-lvl=15 (ok)
Oct 14 20:05:03 aaa-server tac_plus[6493]: added 1 args
Oct 14 20:05:03 aaa-server tac_plus[6493]: out_args[0] = service=shell enter copy discarded
Oct 14 20:05:03 aaa-server tac_plus[6493]: out_args[1] = cmd* enter copy discarded
Oct 14 20:05:03 aaa-server tac_plus[6493]: out_args[2] = priv-lvl=15 compacted to out_args[0]
Oct 14 20:05:03 aaa-server tac_plus[6493]: 1 output args
Oct 14 20:05:03 aaa-server tac_plus[6493]: authorization question for 'iosadmin' tty0 from 192.168.0.1 accepted
Oct 14 20:05:03 aaa-server tac_plus[6494]: join from 192.168.0.1 [192.168.0.1]

I’ve coloured the server output to focus on the authentication and authorization logs individually, displaying that they really are two completely different phases.

However what in regards to the ultimate “A” for accounting? Press Cntr-C to cease following the service log and open up the “accounting log.”

tail -f /var/log/tac_plus.acct 

# Output 
Oct 14 20:05:03 192.168.0.1     iosadmin        tty0    async   begin   task_id=12      timezone=UTC    service=shell

You need to see a message just like the above displaying the “begin” of the session on the router. Return to the router and run “write mem” to avoid wasting the configuration modifications to reminiscence. A brand new log message ought to present up within the accounting log:

Oct 14 20:10:11 192.168.0.1     iosadmin        tty0    async   cease    task_id=13      timezone=UTC    service=shell   priv-lvl=15     cmd=write reminiscence 

And now, exit the router to sign off. A brand new message ought to seem as properly:

Oct 14 20:11:02 192.168.0.1     iosadmin        tty0    async   cease    task_id=13      timezone=UTC    service=shell   disc-cause=1    disc-cause-ext=9        pre-session-time=6 elapsed_time=89  stop_time=1728936662

And BAM. All three “A’s” have been validated. Glorious work!

Hopefully, this weblog has gotten you excited to finish your individual exploration of AAA and TACACS. And, you’re in luck—the CML topology information that I discussed above (and can once more beneath) are there so that you can seize and use instantly. Inside them are lab guides that stroll by means of another essential AAA subjects, corresponding to utilizing native accounts on the console/serial line for IOS and configuring TACACS on Nexus gadgets. Nevertheless, I encourage you to do some impartial exploration and experiment with issues which can be not within the information:

What occurs if you happen to sort the unsuitable username/password? What occurs if the configured “tacacs key” is unsuitable? What occurs if the TACACS server is unreachable?

Understanding the affect of issues and failures is vital to a community engineer’s skill to be snug when one thing goes unsuitable in “actual life.” It’s significantly better to interrupt issues within the lab than look forward to manufacturing to have points. And there’s no higher instrument than Cisco Modeling Labs for that exploration.

My very own AAA exploration will proceed. On this weblog and lab, I solely scratched the floor of the subject and data wanted for various certifications. RADIUS servers can be utilized as an alternative of TACACS, and what about AAA for issues like VPN authentication, community entry with 802.1x, or different platforms like ASA firewalls?

There are such a lot of extra prospects for me to discover in later weblog posts. Would you prefer to see extra on AAA from me? Let me know within the feedback.

Till subsequent time!

Assets

Join Cisco U. | Be part of the Cisco Studying Community.

Observe Cisco Studying & Certifications

X | Threads | Fb | LinkedIn | Instagram | YouTube

Use #CiscoU and #CiscoCert to affix the dialog.

Share: