On this article, I’ll clarify the fundamentals of the Inputs, Mixes, and Outputs pages in EdgeTX radios and what they’re for. As somebody new to EdgeTX, these screens within the mannequin setup would possibly initially appear sophisticated and overwhelming. Nevertheless, as your setups turn out to be extra superior, particularly when flying complicated planes with out an FC, you’ll start to understand the pliability and energy of getting these separate phases in coping with inputs and outputs. Let’s break it down step-by-step to see how they match collectively and the place they arrive into play for various setups.
EdgeTX is a well-liked open supply radio system. All of the radio I at the moment really helpful use EdgeTX, verify them out right here: https://oscarliang.com/radio-transmitter/#Radio-Suggestions
Why Use Three Screens?
When you solely fly quadcopters, you most likely hardly ever must take care of the Inputs and Outputs screens. The Mixes display screen is all it is advisable map controls to channels.
The three separate phases are a practice that carried over from when radio receivers had been immediately related to ESCs and servos with out flight controllers, in earlier days. This was widespread in RC fashions like gliders, wings, and planes. With out an FC, all of the programming needed to be achieved within the radio itself, so having these distinct phases in OpenTX/EdgeTX provides you extra management over manipulating inputs and outputs.
Now, if you happen to use a flight controller, most complicated capabilities (charges, expo, mixing and so on.) might be dealt with there. All you usually have to do in EdgeTX is mapping the controls to the channels within the Mixes display screen. Nevertheless, the Inputs and Outputs pages are nonetheless helpful if you require superior setups and changes, or if you don’t use a flight controller in your airplane.
Right here’s a quick abstract of what every display screen does:
- Inputs: Apply settings like expo or charges as soon as if the enter is used throughout a number of channels in Mixes.
- Mixes: That is the place the complicated programming occurs. You’ll be able to map one enter to a channels, and even combine totally different inputs to a single channel, and configure conduct for particular channels.
- Outputs: Superb-tune how alerts are despatched to servos or your flight controller. For instance, you may reverse the output of a channel if wanted or alter midpoints and endpoints.
Let’s dive deeper into every of those screens.
Inputs: The place Management Begins
The Inputs display screen is the primary cease for uncooked information out of your bodily controls, comparable to sticks, switches, knobs and sliders. It fine-tunes your management inputs earlier than sending them to the Mixes display screen. You’ll be able to assign names, alter weight, apply Expo curves, set charges, and tweak offsets to regulate how inputs behave.
The important thing good thing about the Inputs display screen is the flexibility to use modifications in a single place and distribute that changed enter throughout a number of channels. This avoids the necessity to arrange the identical changes repeatedly for every particular person channel within the Mixes, simplifying the setup course of.
For instance, if you happen to’re flying a airplane (with out FC) with a number of ESCs and want the identical throttle sign despatched to all of them, you alter the throttle enter in a single place and route it to all obligatory channels within the Mixes display screen.
A typical use case is making use of Expo to melt mid-stick sensitivity. As soon as set right here, every other operate referencing the aileron enter will use the modified worth. With out this display screen, you’d must set this up individually for every channel within the mixer, which may very well be time-consuming.
Whereas multi-rotor pilots may not use this display screen usually, fixed-wing and glider pilots depend on it to regulate charges and expo. For quadcopters, the default enter settings usually work simply effective.
Mixes: Mapping Inputs to Channels
The Mixes display screen is the place bodily inputs (e.g., throttle or arm change) are mapped to particular channels.
For instance, a fixed-wing plane with elevons (the place elevator and aileron inputs are mixed), the Mixes display screen lets you ship each pitch and roll inputs to the identical channel. It’s also possible to configure channel-specific settings like limiting servo motion or including delays for easy transitions (helpful for flaps or touchdown gear). Right here’s an instance the place I setup the Mixes display screen for a flying-wing with out FC (and adjusting expo within the Inputs display screen): https://oscarliang.com/taranis-mixer-for-wings/
For FPV drones like quadcopters, setup is extra easy: you map an enter to a channel, and mixing isn’t wanted. I’ve a full tutorial on establishing Mixes for FPV drones right here: https://oscarliang.com/taranis-mixer-for-wings/
As soon as the radio transmits the channels to the drone, the flight controller doesn’t know what every channel is for, all it sees are only a bunch of numbers. You’ll want to inform the flight controller what the channels are, i.e. which channel is throttle and which channel is the arm change and so on. You are able to do this in Betaflight’s receiver tab, and choose a channel map for the primary 4 chanenls (e.g., AETR1234, which maps aileron to Channel 1, elevator to Channel 2, and so on.). After which you may outline the remainder of the channel within the Modes tab as these are usually used for switches. For extra particulars on establishing channel maps, try this submit: https://oscarliang.com/channel-map/
Outputs: Last Output to the Mannequin
The Outputs is the place your combine will get translated into the ultimate sign despatched to the flight controller, ESC or servos. Within the Outputs display screen, you may carry out small modifications comparable to setting sub-trim, adjusting min/max values for channels (to regulate finish factors), reverse the path of management, and guarantee your servos or ESCs don’t transfer past their bodily limits, and so on. Each multi-rotor pilots and fixed-wing pilots will discover this display screen helpful.
Each multi-rotor and fixed-wing pilots will discover this display screen helpful, particularly for fine-tuning their fashions. For extra info on adjusting midpoints and endpoints within the Outputs display screen, try my detailed information right here: https://oscarliang.com/adjust-tx-channel-mid-end-point/.
Conclusion
When you perceive the aim of Inputs, Mixes, and Outputs in EdgeTX, the system’s true energy turns into clear. For less complicated fashions like multirotors, a few of these screens could seem redundant, however for extra complicated setups—like planes and not using a flight controller, or floor autos with intricate steering mechanisms—having this degree of management is invaluable.
The three-stage setup would possibly really feel overwhelming at first, however as you advance, you’ll discover that this method gives unmatched flexibility and precision. Whether or not you’re fine-tuning your quadcopter setup or managing complicated management surfaces on a fixed-wing plane, EdgeTX’s enter, mixer, and output screens present the instruments it is advisable succeed.