I’ve been flying the Flywoo Explorer LR4 for five years, and it stays one in every of my favourite drones to take when touring. It’s light-weight and affords distinctive flight time—excellent for long-range exploration and capturing cinematic footage. So once I heard Flywoo had launched a brand new model that includes the DJI O4 Professional, I knew I needed to give it a strive. On this evaluation, I’ll share my ideas on the up to date Explorer LR4, its execs and cons, and how one can optimize its flight efficiency and reliability.
Be taught extra about long-range FPV flying on this information: https://oscarliang.com/long-range-fpv-flying-mini-quad/
A number of years in the past I travelled overseas with the Explorer carrying the Vista + Bare GoPro 6 on this compact setup.
And it was in a position to produce this degree of footage, very spectacular efficiency. The O4 Professional is barely going to get even higher!
The place to Purchase
You should purchase the Explorer LR4 O4 Professional Version from these distributors:
Word: You should buy the Explorer LR4 with or with out the DJI O4 Professional Air Unit. Nevertheless, the model that features the O4 Professional is $270 extra—whereas the O4 Professional alone prices solely $220. That’s a $50 markup! When you’re snug putting in the Air Unit your self, it’s less expensive to purchase the drone with out it and set up the O4 Professional individually. I’ll stroll you thru the set up course of later on this evaluation.
Equipment embody:
- 8 × Gemfan 4024-2 Black Props
- 2 × Battery Straps (15x180mm)
- Screws
- Extra 3D printed mounts
Specs
- Body: Flywoo Explorer LR4 O4 PRO Body Equipment
- Flight Controller: Goku F722 Mini
- ESC: Flywoo 45A 32bit 4-in-1 ESC
- FPV System: DJI O4 Professional Air Unit
- Receiver: ExpressLRS
- Propellers: Gemfan 4024×2 Bi-blade
- Motors: Flywoo Nin V2 1404 2750KV
- GPS: GOKU GM10 Mini V3
- Battery Connector: XT30
- Weight:
- 171g (with out battery)
- 239g with a 4S 720mAh LiHV (sub-250g)
- 266g with a BetaFPV Lava 4S 850mAh LiPo
Construct High quality & Design
Nearly the Identical because the Authentic Design
Flywoo hasn’t modified a lot concerning the Explorer’s design because the authentic model from 5 years in the past. The primary replace is a modification to the body to accommodate the DJI O4 Professional Air Unit.
Left: Explorer O4 Professional; Proper: Authentic Explorer with Caddx Vista
For these unfamiliar with the Explorer, it makes use of a deadcat format, which helps maintain the props out of the digital camera’s view. The arms are extraordinarily skinny—this drone isn’t constructed for crashing, however quite for staying mild to maximise effectivity and flight time.
The soldering high quality appears nice. The motor wires are soldered vertically, retaining the profile low and decreasing the chance of wire harm. Antennas are mounted in a V-shape at 90°, which is perfect for sign reception—good consideration to element from Flywoo.
Electronics
Flywoo upgraded the FC/ESC stack from 16x16mm to 20x20mm. The bigger board dimension not solely makes repairs simpler probably, however the brand new ESC now options 45A 32-bit assist—a significant step up from the earlier 13A model. It’s an enormous overkill for this construct (you’ll hardly use 10% of its present score), however hey, having further headroom isn’t a nasty factor.
All of the parts are related to the FC by way of connectors – no soldering on the FC in any respect.
The receiver will not be connected to something, simply left there hanging freely. With the O4 digital camera put in it’s form of being pressed by all of the wires between the stack and digital camera, so it’s not free or something and hasn’t been a priority to date throughout my testing.
They’ve additionally lastly added a present sensor, which is an enormous plus for long-range flying. Voltage alone may be unreliable—particularly with low C-rated batteries that endure from voltage sag. With a present sensor, you get a significantly better concept of battery utilization and may higher choose when to land.
As a result of tight house, Flywoo needed to solder the capacitor on to the XT30 connector, which is a bit removed from the ESC. The capacitor can also be fairly small. Whereas not the best setup for noise filtering, it’s higher than nothing. Fortunately, the small motors don’t produce an excessive amount of electrical noise, so this needs to be effective usually. Find out about capacitor on this information: https://oscarliang.com/capacitors-mini-quad/
GPS Enhancements
Flywoo continues to mount the GPS module on the rear, just below the VTX antennas—a location that I’ve all the time discovered problematic. Within the earlier mannequin, the M8-based GPS would take a very long time to get a 3D repair, and satellite tv for pc counts had been typically low on account of interference from the close by VTX antennas. The routing of GPS wires beneath the VTX added much more EMI and made matter worse.
This time round, Flywoo tried to handle the difficulty by:
- Shielding the GPS wires with copper tape
- Upgrading to a more recent, extra highly effective M10 GPS module
Whereas I nonetheless want that they had moved the GPS away from the VTX totally, these adjustments ought to enhance GPS reliability.
Receiver Antenna Mounting
One other design alternative I’m not a fan of is how the receiver antenna is mounted.
Whereas this mounting technique is easier for producers and works effective for short-range flights (inside a few km), it’s not excellent for long-range. For finest efficiency, antennas needs to be mounted vertically. Be taught extra about antenna mounting: https://oscarliang.com/antenna-positioning/
DJI O4 Professional
The DJI O4 Professional Air Unit is securely mounted on standoffs, leaving clearance for wires beneath. This setup permits for respectable airflow, serving to to maintain the air unit cool throughout flight. Though the O4 Professional digital camera is barely mounted between easy TPU adapters, I didn’t discover any jello or vibration within the footage, Gyroflow additionally works flawlessly.
One draw back: the digital camera tilt angle is extremely restricted, with a most of round 15 levels. This restricts how briskly you’ll be able to fly, as increased speeds can have you staring on the floor extra. The restricted angle is because of the body’s compact top—the O4 Professional digital camera is bodily giant, and growing the lean would require a taller body, which in flip would improve weight, drag and cut back effectivity. That stated, for a gradual cruiser just like the Explorer, this angle is satisfactory.
Onboard Buzzer
Flywoo features a self-powered buzzer—a uncommon characteristic in BNF FPV drones. In case your battery dies or will get disconnected in a crash, the buzzer will proceed beeping for hours, vastly enhancing your probabilities of discovering the drone.
When you’ve by no means used one in every of these buzzers earlier than, don’t be shocked when it begins beeping after you unplug the battery—that is anticipated conduct. To cease the beeping, simply press and maintain the button on the buzzer for a couple of seconds to disarm it. When you’re merely swapping batteries, you don’t must press the button, merely plugging in a brand new battery will mechanically cease the beep.
Flight Efficiency
Right here’s footage from one in every of my check flights:
Battery Selection and Effectivity
Relying on battery weight, the Explorer pulls round 6-7A at 50 km/h and seven–8A at 60 km/h—which is impressively environment friendly.
If you wish to keep underneath the 250g weight restrict, the biggest battery you should use could be 4S 720mAh LiHV, which is available in just below the edge and affords round 8 minutes of cruising flight time. LiHV batteries are barely extra energy-dense than common LiPo, supplying you with a bit extra flight time, see my testing right here: https://oscarliang.com/lihv-battery/
With some modifications—similar to eradicating pointless parts—you would possibly be capable to run 4S 850mAh LiPo and nonetheless keep sub-250g. This might probably provide you with over 10 minutes of flight time and as much as 7 km of complete flight distance.
For max flight time, the 4S 18650 Li-ion battery pack is the way in which to go. It might present nearly half-hour of flight time (based mostly on my testing with the earlier model of Explorer), although it will increase the general weight to round 365g. Ideally, it’s best to construct your individual pack utilizing high-quality cells. I like to recommend the Molicel P30B 18650 cells, which I’ve examined right here: https://oscarliang.com/best-18650-li-ion-battery/#Outcomes-and-Suggestions. You too can purchase pre-built Li-ion packs, however they typically use cheaper cells, right here’s a listing of advisable choices: https://oscarliang.com/li-ion-battery-long-range/#Shopping for-Prepared-Made-Li-ion-Battery-Packs
Personally, I really like cruising at round 40–45% throttle (45–50 km/h) with 4S 850mAh, or 50% throttle (50–60 km/h) with the 4S Li-ion pack. This appears to be the optimum throttle vary for maximizing flight time.
Cinematic Smoothness
This drone flies prefer it was on rail, very locked in and secure. Within the flight footage, I used to be flying in 20 MPH gusts, and whereas the drone did drift fairly a bit (on account of its mild weight), it didn’t wobble like many smaller micros do. That stability may be very helpful for capturing cinematic footage.
Freestyle Functionality
With hover at 36% throttle and a high velocity of 105 km/h utilizing a 4S 850mAh LiPo, the Explorer will not be a quick drone. Throughout excessive maneuvers, it tends to wobble and expertise instability because of the restricted energy of the motors.
Let’s be trustworthy—the Explorer feels underpowered. The 1404 motors are thought of very small for 4-inch props; they’re generally utilized in 2.5-inch freestyle drones, and in my expertise, they even battle with 3-inch props! However bear in mind, this drone is constructed for effectivity and endurance, not uncooked energy, so it is sensible.
Whereas it’s no freestyle beast, it will possibly deal with fundamental strikes like split-S, energy loops, and inverted yaw spins simply effective. You simply want to regulate your expectations—this isn’t a 5-inch ripper.
Noise
The Explorer is surprisingly quiet. It’s not silent, however it’s a lot much less intimidating than a 5-inch freestyle FPV drone. This makes it well-suited for flying in parks or city areas with out drawing an excessive amount of consideration.
Sturdiness
As talked about earlier, Flywoo hasn’t modified a lot concerning the Explorer’s body design because the authentic model—and based mostly on my expertise, it’s fairly fragile. I’ve damaged arms in mild to medium crashes—not even exhausting hits—on account of how skinny the arms are. So long as you’re conscious of its fragility and follow cruising as a substitute of aggressive flying, it’s effective.
GPS and Rescue Mode
Slight disappointment right here: the GPS takes fairly a very long time to get a repair from a chilly begin—about 6 minutes to accumulate 8 satellites. The max satellite tv for pc rely was round 19. I believe the low GPS efficiency is because of its mounting location—it’s underneath the VTX antennas.
That stated, Betaflight GPS Rescue Mode works nicely. I’d nonetheless suggest a couple of adjustments to make it higher—similar to adapting “throttle fallback” (see my Rescue mode information for element) and decreasing return velocity, and many others.
Learn how to Setup
Putting in DJI O4 Professional
I purchased the Flywoo Explorer with out the DJI O4 Professional Air Unit, so I needed to set up it myself.
Since that is fairly a small quad, engaged on it is a little more difficult in comparison with bigger drones like a 5-inch, however it’s nonetheless doable with persistence. It took me about half-hour. No soldering is required—simply mount the digital camera, air unit, and antennas, plug within the cable, and also you’re good to go. Listed here are the steps.
Take away the antennas from the DJI O4 Professional Air Unit.
Set up the antennas into the TPU holder.
Set up the 4 standoffs behind the body for mounting the air unit.
I most popular to run the digital camera cable underneath the FC, so I eliminated the FC from the stack quickly.
Set up the O4 Professional digital camera within the body.
Reattaching the antennas onto the air unit, plug within the cable from the FC, and mount the air unit onto the standoffs. That’s it!
There’s no must take away the SBUS wire within the O4 Professional cable, as a result of it’s related to UART1 (particularly RX1) on the flight controller. For the reason that ExpressLRS receiver is related to UART2, there’s no battle so long as you’re not utilizing UART1 for anything. When you plan to make use of UART1, it’s best to take away the SBUS wire within the O4 cable.
Earlier than powering the drone for the primary time, plug in a smoke stopper such because the Vifly Shortsaver, and join a battery and check the drone and see if it powers up accurately. It is best to hear the ESC/motor initiation beeps.
Activate the O4 Professional should you haven’t already: https://oscarliang.com/how-to-setup-dji-o4-pro/#Activation
Pair the DJI O4 Air Unit together with your goggles – Information: https://oscarliang.com/how-to-setup-dji-o4-pro/#Pairing-DJI-Goggles-3-with-O4-Air-Unit-Professional
Firmware
The flight controller (FC) board goal is FLYWOOF722PROV2, and it comes preloaded with Betaflight firmware model 4.5.1. For inventory CLI Diff, see right here.
Right here’s the FC pinout diagram.
ESC Firmware: F4A_4IN1 – AM32 2.16. Listed here are the default ESC settings.
ELRS Receiver Firmware Goal: Flywoo EL24E 2.4GHz RX, firmware model says “merge 481945 CE_LBT”, unsure what model that is however it binds effective with my radio which is on ELRS V3.5.
Betaflight Setup
What May Be Improved
By eradicating pointless elements, I’m hoping to scale back the load by one other 15–16 grams, which might enable me to make use of a 4S 850mAh LiPo and nonetheless keep underneath the 250g restrict. This is able to enable 10+ minutes of flight time, which is superb for exploring new spots when touring. If there’s curiosity, I can write a publish detailing these modifications—let me know within the feedback!
The FC stack may benefit from utilizing plastic nuts as a substitute of steel lock nuts. Not solely are steel nuts heavier, however they’re additionally tough to take away whenever you wish to work on the FC.
As talked about earlier, mounting the receiver antenna vertically could be excellent. I’m not doing that simply but as a result of I plan to improve to a variety receiver, with antennas mounted on either side of the body—identical to I did with the unique Explorer. With that setup and simply 100mW on my T-Lite V2 radio, I used to be in a position to fly out 3km and again.
It’s a little bit of a missed alternative that Flywoo didn’t use their GOKU Nano GPS with an onboard compass. With Betaflight 4.6 bringing place maintain characteristic, this might have been an excellent addition. I’m additionally not a fan of the present GPS mounting location—beneath the VTX antennas. I feel it could be higher positioned on the entrance, above the FPV digital camera, and away from all of the antennas.
Additionally, there’s no handbook included, and the screw luggage aren’t labeled for his or her objective—solely by dimension. It could have saved a while in the event that they had been labeled (e.g., M2x7 for propellers, M2x4 for O4 Professional digital camera, and many others.).
Some Betaflight settings might have been configured extra thoughtfully for the Explorer. For instance, GPS and OSD settings had been left at default. Whereas Flywoo did present a customized PID tune, the filter settings had been principally left untouched. There’s undoubtedly room for enchancment in filters, PIDs, and Rescue Mode configuration. I’ll be posting my configuration on Patreon.
Inventory PID Settings
Additionally value noting: the present sensor isn’t calibrated correctly – it overestimated present draw. I like to recommend setting the present scale to 440.
Ultimate Ideas
I’ve been an enormous fan of the Explorer LR4 from Flywoo for years—it’s a incredible platform with a great deal of potential. There’s nonetheless room for enhancements, I want Flywoo had executed extra than simply improve the FPV system. However total, the Explorer LR4 with the DJI O4 Professional is a incredible long-range FPV drone, particularly for many who journey so much and have weight necessities. I’d completely suggest it.
You should purchase the Explorer LR4 O4 Professional Version from these distributors:
Professionals
- Extremely environment friendly – affords nearly half-hour of flight time with Li-ion battery
- Below 250g with a smaller battery, but nonetheless affords as much as 8 minutes of flight time
- No want to hold a GoPro because of the DJI O4 Professional
- Very compact and nice for touring
- Flies easily out of the field
- Rescue mode works straight away (solely minor tweaks wanted for optimization)
Cons
- Takes a very long time to get a GPS repair from a chilly begin
- Lacks energy and freestyle agility
- Fragile construct – not excellent for newbies and bashing/crashing
- Over 250g when utilizing bigger batteries for prolonged flight time
- Drifts so much when it’s windy in comparison with bigger 7″ lengthy vary quads